Ford Utility / Explorer Plug and Play Healight Flasher

$169.99
Free Shipping!

The new rear Plug and Play Utility headlight flasher available for Ford Police Utility and Explorer. This unit is completely plug and play.  Unit will flash your Headlights. View Video above to see how unit operates. Simple installation process, no wires to cut!

Headlight Flasher Interface for 2015+ Utility

INSTALLTION INSTRUCTIONS:

1. LOCATE TAIL LIGHT ASSEMBLY ON THE PASSENER SIDE OF THE VEHICLE.

2. UNPLUG OEM TAIL LIGHT PLUG.

3. INSERT MALE PLUG FROM INTERFACE INTO THE OEM TAIL LIGHT PLUG, MAKING SURE THE PLUG IS CONNECTED SECURELY.

4. INSERT FEMALE PLUG FROM INTERFACE INTO THE OEM HARNESS, MAKING SURE THE PLUG IS CONNECTED SECURELY.

5. REPEAT ON DRIVERS SIDE AND CENTER PANEL. THE CENTER PANEL PLUGS ARE THE LARGER PLUGS.

CONNECT WIRES AS FOLLOWS:

14G BLACK- CONNECT EITHER/BOTH TO PROPER BODY GROUND

14G RED- CONNECT TO 12V DC CONSTANT POWER WITH 20 AMP INLINE FUSE

14G ORANGE- OUTPUT FOR AUXILLARY CIRCUIT 12V DC

18G RED- CONTROL WIRE FOR INTERFACE

18G ORANGE- CONTROL WIRE FOR AUXILLARY OUTPUT

AUXILLARY OPTION

OPTION CAN BE USED TO POWER AND GROUND EXTRA LED LIGHTING. AUXILLARY LIGHTING CAN WORK INDEPENDENTLY OR CAN BE CONNECTED TO CONTROL WIRE OF THE MODULE, IF DESIRED. IN DOING THIS, THE AUXILLARY LIGHTING AND THE MODULE WILL SHARE A CONTROL WIRE AND ACTIVATE SIMULATIONLY. AUXILLARY CURCUIT IS RATED FOR UP TO 20 AMPS.

INTERFACE MODULE FEATURE

WHEN INTERFACE MODULE IS ACTIVATED AND THE BRAKES AND/OR TURN SIGNALS ARE APPLIED THE MODULE WILL CEASE FLASHING ALLOWING THE FACTORY FEATURES TO BE VISIABLE. ONCE BRAKE LIGHTS AND/OR TURN SIGNALS ARE NOT BEING APPLIED THE INTERFACE MODULE WILL RETURN BACK TO FLASHING. IF ANY AUXILLARY LIGHTING IS CONNNECTED TO INTERFACE MODULE IT TO WILL STOP FLASHING WHEN THE BRAKES AND/OR TURN SIGNALS ARE APPLIED.